It was great seeing everyone at Power Test 2019 in Texas! The event went very well, and that’s due to our sponsors, Corporate Alliance Partners, trade show vendors, and most important — the hard work and dedication of the NETA Staff. Mark your calendars for PowerTest 2020 in Chicago February 24 – 28, 2020, and make plans to join us …
NFPA 70E and Electrical Testing
In 1976, OSHA asked the National Fire Protection Association (NFPA) to develop a safety standard it could consult to develop its own electrical safety regulations. This was the start of NFPA 70E. At that time, Chapter 1 included the safety portions of the National Electric Code (NEC) broken out for compliance officers to use in the field. Not many people …
Electrical Safety Program Principles: Are They in Your Electrical Safety Program?
NFPA 70E Article 110.1 and CSA Z462 Clause 4.1.6 outline the requirements to implement a compliant electrical safety program as part of an employer’s overall occupational health and safety management system (OHSMS). ANSI Z10, Occupational Health & Safety Management Systems (for the US) and CSA Z1000, Occupational health and safety manage-ment (Canada) outline general requirements and specific content for an …
High-Voltage Arc Flash Assessment and Applications, Part 1
Protecting utility workers and other working personnel who are exposed to line-to-line voltages above 15kV at live electricity installations is critical. For this reason and to ensure compliance with OSHA regulations, arc flash hazards must be evaluated and studied for every facility with an electrical installation. An arc flash produces extremely high temperatures, intense heat flux and radiation, high sound …
ANSI/NETA Standards Update
ANSI/NETA MTS-2019 New Edition ANSI/NETA MTS, Standard for Maintenance Testing Specifications for Electrical Power Equipment and Systems, 2015 Edition, has been revised. ANSI/NETA MTS-2019 was approved by ANSI as an American National Standard on February 7, 2019. The revised edition of ANSI/NETA MTS, scheduled for release in March 2019, features new content including Online Partial Discharge …
ASTM F18 Committee Report
The ASTM Committee has purview over all protective electrical equipment, including arc flash suits, arc-rated clothing, rubber insulated gloves, insulated tools, and grounds. They do not specify how they are to be used, but specify how they are to be designed, tested, cleaned, and cared for. The meeting was held in Orlando, Florida, on October 8–9, 2018, which sounds nice, …
Insulated Conductor Committee News
The Insulated Conductor Committee’s groups, which include engineers and scientists, met in Orlando, Florida, for the fall 2018 IEEE/ICC meeting from October 29–31, 2018. The Insulated Conductors Committee (ICC) is a professional organization within the Power Engineering Society (PES) of the Institute of Electrical and Electronics Engineers (IEEE). This is an ongoing opportunity for the InterNational Electrical Testing Association to …
PowerTest 2019 – New Product Form
AEMC Instruments www.aemc.com AEMC’s New Line of Simple-to-Use Data Loggers AEMC Instruments has just introduced a new, low-cost line of simple-to-use data loggers. These small, compact data loggers measure just 3 inches by 3/4 inches. The 10 models in the family measure dc volts, ac volts, dc current, pulse, event, and temperature (model dependent). Inputs to each unit are facilitated …
IEEE Transformers Committee Report
Several of the subcommittees under the IEEE Transformers Committee are doing significant work. This report covers work in the last two quarters of 2018. Insulating Fluids Subcommittee C57.104, IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers (DGA) is being revised and will change how DGA results will be interpreted. It went out to the working group for …
Practice Theory: High-Voltage Laboratory Testing of New Electrical Products
High voltage is defined by the National Electrical Code (NEC) as any voltage over 600V and by the International Electrotechnical Commission (IEC) as any voltage greater than or equal to 1,000V. NETA uses the IEEE definition: any voltage greater than or equal to 100kV and less than or equal to 230kV. Other standards and industries define high voltage at different …





